|
Perma-slide™
SCREEN |
|
Applications
-
Wall Murals
-
Guitars
-
Busses
-
Signs
-
Displays
-
Golf Carts
-
Advertising
-
Cars
-
Fashion
|
 |
Surfaces
-
Painted
Surfaces
-
Powder Coated
-
Stainless
Steel
-
Marble
-
Ceramic
-
Glass
-
Wood
-
Plastics
-
Fiberglass
|
But, What IS it?:
|
Heatrans-permaslide (hettrans purmeslid) n.
1.a
permanent, durable, low profile water
transfer with a removable
pre-mask. 2.Sometimes printed in lithography for fine detail or
screen printed for outdoor
durability
Originally produced as an
industrial marking, Perma-slide is now also available as a
consumer applied marking with good tolerance to application
variables and very long shelf life. This is a special
water-slide decal which has a carrier film (pre-mask) that
can be easily removed after the decal has been applied and
dried. It leaves behind a low profile (12microns thick),
highly resolved graphic image. It appears to have been
printed directly on the surface. It is almost impossible to
see it was applied as a decal as there is no telltale
outline, halo, or film evidence around the marking. The
pre-mask allows many small and individual design elements to
be applied at the same time and has replaced ceramic decals
in may cases reducing expensive energy cost to fire a kiln.
It can also be heat cured for added durability on glass,
metal, ceramic and many other surfaces. When properly cured
the marking is more durable than a vinyl label. It is
permanent and safe for dishwasher or outdoor use. It can be
removed, if desired, with a special solvent like acetone |
-
Key features of Perma-slide:
Bright
permanent colors, resistant to water, sunlight and heat, Acid
Free Residential, Commercial or Industrial applications,
Home Furnishings: Ceramic Tiles, Sporting Goods,
Stationery, Memory Books, Powder coated surfaces, Commercial
Sporting Goods (Aluminum or wood bats) Anodized steel or
aluminum, Automobile, Truck and Bus, One Way Vision, Bicycles,
fiberglass, Vinyl, Industrial Machinery, Computers, Electrical
Appliances, Product Identification.
-
Non Toxic:
Meets international
safety standard of En71, BEn71 and ISO 9001:1994 USA FDA
Compliance Policy Guides 7117.07 and 7117.06 for extractable
Lead and Cadmium in pottery (ceramics) and California Safe
Tableware Law and California Proposition 65 for extractable
Lead and Cadmium in pottery. Excellent replacement for Ceramic
decals.
.
|
Surface
Application Chart: |
|
|
|
Screen Press Sheet Size:
11 X 17 :20 X 26
Optional Materials available:
Softener/Remover.
Graphic Requirements: Illustrator
.AI or Freehand files
Two
Custom Variations Available
-
TXP - Reverse or transfer style,
no pre-mask. This is useful for the application of large designs
to flat surfaces like windows or furniture. Just wet the surface,
place the transfer, and moisten the back of the paper to release
it.
-
WXP - Waterslide style, no
pre-mask. Ideal for full coverage patterns like marble or granite.
Simply follow steps 1-5 in the instructions above.
|
Application
Information: |
|
Soak Decal |
Apply Face Up |
Press (Remove water)
|
Cure |
|
 |
Easy Application :
-
Clean the surface.
(It need not be dry.)
-
Cut the desired
decal from the sheet.
-
Soak the decal with
clean water for 5-10 seconds.
-
When the decal is
ready to slide, place it (face up) on to the surface.
-
Remove the water
completely with a squeegee and or towel.
-
Allow to it dry
overnight.
-
* Peel the film
(pre-mask) from the decal. * This may be accelerated with the
addition of heat.
-
The time and
temperature may vary with surface and ambient conditions.
-
The chemical
reaction forms a permanent bond.
-
This process
provides a texture and hardness similar to enamel painting.
|
